Byte SherlockBarrackpore · walk-ins & appointments welcome

SMD Resistor Code Calculator

Type the code printed on a surface-mount resistor and get its value instantly. Works with 3-digit codes (103 = 10 kΩ), 4-digit codes (1002 = 10 kΩ), letter notation (4K7 = 4.7 kΩ, 4R7 = 4.7 Ω) and EIA-96 codes (01C = 10 kΩ).

सापट पर लिखे ह्रीतु के हिसाब से जानी तुजे साध साध पाएं। 3-digit (जैसे 103 = 10 kΩ), 4-digit, R-notation और EIA-96 सहित सभी सपण्टै हैं।

Sapet par likhe code se value turant nikalo. 3-digit (jaise 103 = 10 kΩ), 4-digit, letter notation (4K7) aur EIA-96 sabhi saported hain.

Quick answer: a resistor marked 103 is 10,000 Ω = 10 kΩ (10 × 1000). A resistor marked 472 is 4.7 kΩ, 1002 is 10 kΩ, 4K7 is 4.7 kΩ, and 01C is 10 kΩ.

Tip: most codes are 3 digits. Letters work too: 4K7 = 4.7 kΩ. Uppercase or lowercase both.

—
Enter a code above.

How the SMD resistor code works

Surface-mount (SMD/chip) resistors are too small for colour bands, so the value is printed as a short code. There are four common formats:

1. Three-digit code (most common, usually ±5%)

The first two digits are the value, the third digit is the number of zeros to add.

CodeMeaningValue
10310 × 100010,000 Ω = 10 kΩ
47247 × 1004,700 Ω = 4.7 kΩ
47047 × 147 Ω (not 470!)
22022 × 122 Ω

2. Four-digit code (1% precision)

The first three digits are the value, the fourth digit is the multiplier.

CodeMeaningValue
1002100 × 10010,000 Ω = 10 kΩ
4701470 × 104,700 Ω = 4.7 kΩ
4700470 × 1470 Ω (not 4700!)
2001200 × 102,000 Ω = 2 kΩ

3. Letter notation (R, K, M — the letter is the decimal point)

The letter replaces the decimal point: R = ohms, K = kilo-ohms, M = mega-ohms (G = giga-ohms). This avoids a leading dot that could be missed when printed.

CodeMeaningValue
4K74.7 kilo-ohms4.7 kΩ
1K21.2 kilo-ohms1.2 kΩ
10K10 kilo-ohms10 kΩ
2M22.2 mega-ohms2.2 MΩ
4R74.7 ohms4.7 Ω
0R22 or R220.22 ohms0.22 Ω
10R10 ohms10 Ω

4. EIA-96 code (1% resistors, small packages)

Three characters: two digits look up a base value in the EIA-96 table, the letter is a multiplier.

CodeLookupMultiplierValue
01C01 → 100C = ×10010 kΩ
39D39 → 249D = ×1000249 kΩ
85X85 → 750X = ×0.175 Ω
Full EIA-96 two-digit lookup table
DigitsBaseDigitsBaseDigitsBaseDigitsBase
01100251784931673562
02102261825032474576
03105271875133275590
04107281915234076604
05110291965334877619
06113302005435778634
07115312055536579649
08118322105637480665
09121332155738381681
10124342215839282698
11127352265940283715
12130362326041284732
13133372376142285750
14137382436243286768
15140392496344287787
16143402556445388806
17147412616546489825
18150422676647590845
19154432746748791866
20158442806849992887
21162452876951193909
22165462947052394931
23169473017153695953
24174483097254996976

Letter multipliers: Z = ×0.001, Y/R = ×0.01, X/S = ×0.1, A = ×1, B = ×10, C = ×100, D = ×1000, E = ×10,000, F = ×100,000.

Common SMD resistor codes cheat sheet

CodeValueCodeValue
10010 Ω331330 Ω
101100 Ω3323.3 kΩ
1021 kΩ471470 Ω
10310 kΩ4724.7 kΩ
104100 kΩ47347 kΩ
1051 MΩ474470 kΩ
15015 Ω5625.6 kΩ
22022 Ω6826.8 kΩ
221220 Ω8228.2 kΩ
2222.2 kΩ91091 Ω
10011 kΩ (4-digit)100210 kΩ (4-digit)
4K74.7 kΩ1K21.2 kΩ
4R74.7 Ω01C10 kΩ (EIA-96)

FAQ

What does a 103 SMD resistor mean?

103 means 10 followed by 3 zeros: 10 × 1000 = 10,000 Ω = 10 kΩ. The first two digits are the value, the third is the number of zeros.

Is a resistor marked 470 equal to 470 ohms?

No. 470 is 47 × 1 = 47 Ω. The third digit is a multiplier, not another value digit. For 470 Ω you need 471.

What does 1002 mean?

Four-digit code: 100 × 100 = 10 kΩ. Four-digit codes are typically 1% tolerance.

What do 4K7, 1K2 and 2M2 mean?

The letter is the decimal point: 4K7 = 4.7 kΩ, 1K2 = 1.2 kΩ, 2M2 = 2.2 MΩ, 4R7 = 4.7 Ω, 0R22 = 0.22 Ω, 10K = 10 kΩ.

What is EIA-96?

A 3-character code for 1% resistors: two digits look up a base value, the letter is a multiplier. 01C = 100 × 100 = 10 kΩ; 39D = 249 × 1000 = 249 kΩ.

Which code is 1 kΩ?

102 (10 × 100) or 1001 (1000 × 1). Both are 1000 Ω.

Which code is 4.7 kΩ?

472 (47 × 100) or 4701 (470 × 10).

Do SMD resistors use colour bands?

No — they are too small, so they use printed codes. Colour bands are for through-hole resistors. If you are repairing a laptop or phone board and need the part fitted, see our laptop repair service or engineer-approved parts.

About this tool

This calculator is maintained by Sayan Roy Chowdhury, the engineer behind Byte Sherlock, a laptop and mobile repair workshop in Barrackpore, West Bengal. We use these codes daily when tracing boards, and built this page because a fast decoder is genuinely useful on the bench. If you are debugging a dead laptop instead, send us the symptoms on WhatsApp.

Related: Voltage divider calculator with live circuit diagram · Gear picks · Repair guides